19DECEMBER 2023manual processes can be minimized. The sterility requirement and microbial contamination risk of bioink and bioprinted products are similar to that of biological products. Therefore, closure integrity of the primary container for bioinks and bioprinted products is of paramount importance and needs to be maintained at the storage and transportation conditions to ensure the sterility of the product. Contact surface of a bioink container should not be reactive, additive, or absorptive in a way that alters pre-determined bioink characteristics, e.g., physio-chemical properties and biological properties. Materials should be chosen carefully for these containers, including coating, to minimize extractables, leachables, and particulates. Particulates are the unwanted particles in the bioink, that may arise from the single-use plastics used in the bioink manufacturing process such as mixing, transferring, etc. Particulates may also arise from the container components such as the friction between the piston & cartridge during bioprinting, affecting the quality and consistency of the bioink product. Particulates and aggregates may create blockage in the printing nozzle, requiring higher pressure for extrusion resulting in higher shear stress experienced by the cells leading to cell damage & death. Blockage may also affect the printing process and result in flaw in the structure, that may have detrimental impact on the function of the printed tissue. Particulates may exhibit pyrogenic properties and could also interact with the cells contained within bioink, which may affect the biological function of the cells and eventually the safety and efficacy of the bioprinted tissue engineered product. The container material is critical in terms of mitigating particulate risk. Piston and cartridge material, coating material and process, if any, would play a large part on the particulate generation during bioink handling and bioprinting processes. Primary container closure system for bioinks and bioprinted products should be cleaned, sterilized, and processed to remove pyrogens and particulates. Appropriate quality controls criteria should be in place for all the components of container closure systems, to reduce the risk of particulates. Bioink container material should be conducive to freezing, long term storage, shipping, and thawing. Container material should be easily sterilizable and the design and geometry should be favorable for aseptic handling of bioink for mixing with cells and filling of cellular bioink. Containers should withstand the physical changes of the bioink while freezing, thawing, transportation, for example, the expansion or shrinkage of bioink while freezing or thawing. Container closure integrity should be maintained at the ultra-low temperature and conditions to ensure maintenance of bioink sterility and other specifications, i.e. chemical, biological, and mechanical properties. Additionally, bioink container needs to be compatible with the pneumatic systems found in the bioprinters. The geometry of bioink containers must be compatible with the print heads of the bioprinters as well as the adapters and fixtures used for pneumatic or mechanical deposition of bioinks. At the same time the friction between the piston and the cartridge needs to be minimized to lower the break-loose & gliding forces and ensure the cells do not get damaged by high shear forces. Moreover, many bioink formulations are light sensitive and, in this case, containment needs to protect the product from light exposure during storage.Despite these challenges, the bioprinted tissue engineering products are rapidly progressing towards clinical trials. These developments are being driven by considerable investment from corporate collaborations between therapy developers and enabling technology providers. Further industry wide collaboration needs to be formed between bioprinter manufacturers, bioink developers and container providers to ensure interoperability of these components for smooth manufacturing and use of bioprinted products. These advances will accelerate the translation of this magnificent academic research success for bioprinting to become a clinical reality and overcome the debilitating organ shortage. Further industry wide collaboration needs to be formed between bioprinter manufacturers, bioink developers and container providers to ensure interoperability of these components for smooth manufacturing and use of bioprinted products
< Page 9 | Page 11 >